PANASONIC TGP600 LIGHTS
Description & Suggested Action (Likely Failures in Bold)
|STATUS||Green (Solid)||The Base Unit is connected to the Internet. The startup process is complete and you may now make Internet calls.|
|Green (Flashing)||The base unit is downloading data. Do not disconnect the Ethernet cable or AC adaptor for the base unit until the STATUS indicator stops flashing and lights in steady green.|
|Red (Solid)||When the Base Unit is turned on, the STATUS indicator lights in red for about 10 seconds.|
|Red (Flashing)||The Base Unit is registering a handset.|
|Red (Rapidly Flashing)||The Base Unit is paging handsets. (KX-TGP-500 only)|
|Amber (Solid)||The Base Unit's IP address may conflict with the IP addresses of other devices on your local network. Contact your Administrator for further information.|
|Amber (Flashing)||The Base Unit is obtaining an IP address or is obtaining configurations. // Please wait.|
|The Base Unit is registering with your phone system. // Please wait.|
|If the STATUS indicator contiues to flash check the following:
- Network settings may not be correct. // Contact your Administrator.
- Many installation issues can be resolved by resetting all the equipment. // First, shut down your Modem, Router, Hub, Base Unit & Computer.
- If you cannot access Internet web pages using your Computer, check to see if your phone system is having connection issues in your area.
|Amber (Rapidly Flashing)||// Unplug the Base Unit's AC adaptor to reset the unit, then reconnect. If the STATUS indicator is still flashing rapidly, there may be an issue with the Base Unit hardware. // Contact your phone system Dealer.|
|Unlit||The Base Unit power is off.|
|The Ethernet cable is not connected properly. // Connect it.|
|Your network devices (Hub, Router, etc.) are turned off. // Check the LEDs for the link status of the devices.|
The Base Unit power is booting up.
SimpleVoIP 2020 all rights reserved